Central Highlands LiDAR
  •   Search
  •   Map
  •  Sign in

Central Highlands LiDAR

dataset
Dataset: Central Highlands LiDAR Assembly: Single
 
Citation proposal Citation proposal

Central Highlands LiDAR

Department of Transport and Planning

https://metashare.maps.vic.gov.au/geonetwork/srv/eng/catalog.search#/metadata/43adb4df-a3a1-5d51-ae4a-cf564d7133bd

Details

Contacts

  Custodian



  Point of contact

Department of Transport and Planning - Coordinated Imagery Program

PO Box 500

East Melbourne

Victoria

3002

Australia

 

Identifiers and Keywords

ANZLIC Id
ANZVI0008105564 
Topic category
  • Elevation
 

Resource Constraints

Use limitation
Departmental 
Classification
Limited Distribution 
 

Other Dataset Details

Format
LAS 1.4 
 

Spatial

Spatial representation type
Point Cloud 
Reference system identifier
MGA Zone 55 GDA2020

 

Resolution

Horizontal Accuracy
0.3m 
Vertical Accuracy
0.1m 
 

Quality

Conceptual Consistency
LiDAR point cloud is supplied in LAZ (LAS 1.4 format). LAS files meet expected classification and point density specifications. 
Missing Data
Complete coverage of AOI 
 

Lineage

Description
RPS: LiDAR in this AOI was captured by RPS. The IMU and post processed airborne GPS logs were used to generate the LiDAR point cloud from the waveform instrument data. Raw LiDAR swaths were levelled to establish internal consistency, merged and 1km x 1km tiles in LAS v1.2 format were created. An automatic classification algorithm was applied in TerraScan software to produce an initial classification of ground (2) and unclassified (1). High and low noise points were automatically classified and allocated to class 7. On completion of the ground classification automatic algorithms were used to classify unclassified points to low vegetation (3), medium vegetation (4), high vegetation (5) and buildings (6). Review of the classification was completed on data present within the AOI only. The classification accuracy was not measured empirically. Manual editing of ground points were completed in areas where log piles were identified ¿ these log pile points were placed into 'unclassified' class 0. 

Text

No information provided.
 

Acquisition Date

Begin date
2019-07-01 
End date
2019-11-27 
 

Instrument

Name
Trimble AX60 
Type
LIDAR 
Platform Type
Aerial 
 

Acquisition Data (Common)

Status
Completed 
Assembly
Single 
Tile Size
0.5 km 
 

Point Cloud Details

Scan Rate (Hz)
102Hz 
Scan Frequency (kHz)
400kHz 
Footprint Size (m)
0.23m 
Point Density Target (pts/m2)
8points/m2 
Point Density Actual (pts/m2)
9.44999981points/m2 
Point Spacing Target (pts/m)
0.34999999points/m2 
Point Spacing Actual (pts/m)
0.34points/m2 
Ellipsoid Provided
1 
Ellipsoid Vertical Datum
GRS80 Ellipsoidal (ITRF2008) 
Ellipsoid Format
LAS 1.4 
Geoid Vertical Datum
AUSGEOID2020 
Class Level
3 
Classification
Class Level Class 0 - Unclassified Class 1 - Default Class 2 - Ground Class 3 - Low Vegetation Class 4 - Medium Vegetation Class 5 - High Vegetation Class 6 - Buildings/Structures Class 7 - Low/High Points Class 8 - Model Key Points Class 9- Water Class 10 - Bridge Class 12 - Flightline Overlap Points
3 0 1 1 1 1 1 1 1 1 1 1 0
 

Aerial Survey Details

Runs
149 
Run Orientation
Various 
Swath Width
924 
Side Overlap
50 
Flying Height Unit
agl metre 
Flight Height
800 
 

About the Metadata Record

Metadata identifier
urn:uuid / 43adb4df-a3a1-5d51-ae4a-cf564d7133bd

Resource Type
Dataset 
Date info (Creation)
Date info (Revision)
2023-03-22T00:22:23
Standard Name
ISO 19115-3:2018 
Profile Name
DELWP Profile 
Profile Version
Version 1 
Profile Date
2019-05-24 
 

Metadata Constraints

Classification
Unclassified 
 
 


Provided by

Share on social sites





  •   About
  •   Github
  •