ad52dc2f-1da9-5449-90f8-b422f647db4b urn:uuid 2023-03-22T00:22:23 ISO 19115-3:2018 DELWP Profile 2019-05-24 Version 1 2019-05-24T00:00:00 https://metashare.maps.vic.gov.au/geonetwork/srv/api/records/ad52dc2f-1da9-5449-90f8-b422f647db4b MGA Zone 55 GDA2020 EPSG Geodetic Parameter Woodend LiDAR ANZLIC Dataset Identifier 2001-02 ANZVI0008106806 custodian Dataset: Woodend LiDAR Assembly: Single Department of Transport and Planning PO Box 500 East Melbourne Victoria 3002 Australia Coordinated Imagery Program +61 3 136186 coordinated.imagery@transport.vic.gov.au 0.3 0.1 elevation LAZ 1.4 (Compressed LAS) General https://www.deeca.vic.gov.au/maps/home WWW:LINK-1.0-http--related Web page listing describing spatial information in Department of Energy, Environment and Climate Action (DEECA) Woodend LiDAR ICSM Level 2+ classification was applied and the data files include RGB imagery point colourisation on all tiles. 1 The LiDAR files are full data tiles (no null space) and the extent and coverage is common with the other datasets in this project. 1 Classified Point Cloud - AAM uses proprietary ground classification routines in TerraScan to remove any non-ground points and generate an accurate ground surface. Once the ground routine has been completed a manual quality control routine is done using aerial imagery, hill shades, cross-sections, and profiles within the TerraSolid software suite. After this QC step, a peer review and supervisor manual inspection are completed on a percentage of the classified tiles based on the project size and variability of the terrain. Concurrent imagery has been orthorectified and used to colourise the point cloud with RGB values. Overlap Point Flag - Class 12: ’Overlap’ was not used in this project. All points were classified into classes requested and flagged with the Overlap bit flag (Bit 3) in addition to being classified. Geometrically unreliable points near the extreme edge of the swath were classified into class 1, flagged with the Withheld bit flag (Bit 2) and not included in further processing. 2022-02-05 2022-02-06 Not Entered Not Entered DELWP PlatformType Not Entered 0 0 0.30000001 8 0.34999999 1 The survey was adjusted to State Survey Control Marks supplied by the Surveyor General of Victoria LiDAR was captured under standard conditions suited for LiDAR survey with requirements for concurrent aerial photography being a secondary consideration. Not Applicable to this block (or within +/- 2hrs of low tide if a coastal blocks) 2 13. human-made feature, 14. culverts 0 1 1 1 1 1 1 1 0 1 1 0 57 1000