Greater Melbourne LiDAR - Difference DTM
  • MetaShare PROD
  •  
  •  
  •  

  Greater Melbourne LiDAR - Difference DTM

dataset
Dataset: Greater Melbourne LiDAR - Difference DTM Assembly: Mosaic
 
Citation proposal Citation proposal

Greater Melbourne LiDAR - Difference DTM

Department of Transport and Planning

https://metashare.maps.vic.gov.au/geonetwork/srv/eng/catalog.search#/metadata/c0d4fb08-1c2f-5252-ab80-046d987fa1ca
 
  • Description
  • Temporal
  • Spatial
  • Maintenance
  • Format
  • Contacts
  • Keywords
  • Resource Constraints
  • Lineage
  • Metadata Constraints
  • Quality
  • Acquisition Info
  • Raster Data Details
  • Raster Type Details
  • Point Cloud Data Details
  • Contour Data Details
  • Survey Details

Simple

 
 

Description

Title
Greater Melbourne LiDAR - Difference DTM 
 
 

Temporal

Time period
2017-11-282018-10-27 
 
 

Spatial

Horizontal Accuracy
0.4m  
Vertical Accuracy
0.2m  
Code
MGA Zone 55 GDA94 
 
 

Maintenance

 
 

Format

Title
ESRI Ascii 
 
 

Contacts

  Point of contact

Department of Transport and Planning - Coordinated Imagery Program  
PO Box 500
East Melbourne
Victoria
3002
Australia
 
 

Keywords

Topic category
  • Elevation
 
 

Resource Constraints

Use limitation
General 
Classification
Unclassified  
 
 

Lineage

Description
A difference analysis was carried out over the entirety of the dataset in comparison to a series of historical DTM datasets covering the same area (summarily described as 2009 Melbourne DTM data). Difference rasters were calculated on an Old Minus New methodology in order to calculate summary statistics. This means that when viewing the difference raster, a negative value represents a cell which appeared higher in the 2018 dataset than the 2009 data, and a positive value represents a cell which appeared lower in the 2018 dataset than the 2009 data. Analysis was done on a per 1km x 1km tile basis, meaning that on average each tile summarises the values of approximately 1,000,000 individual DTM values, each of which is the averaged value of approximately 8 LiDAR measurements, meaning these summary statistics are a broad measure only. For more accurate assessments of the absolute accuracy of each individual section of the dataset, comparison checks have been carried out throughout the QA4LiDAR process and should be used for an accurate assessment on a per site basis. Having said this, the difference analysis is a useful tool for the assessment of the overall difference of the dataset in comparison to previously collected data. 
 
 

Metadata Constraints

Classification
Unclassified  
 
 

Quality

Attribute Quality
Positional Accuracy
Conceptual Consistency
Comments
The data adheres to the logical rules of data structure, attribution and relationships as per project specifications. 
Missing Data
Comments
Dataset is complete for the defined project extent. 
Excess Data
 
 

Acquisition Info

Platform Type
Aerial  
Assembly
Mosaic  
Tile Size
1 km  
 
 

Raster Data Details

Raster Type
Difference Raster  
X Pixel Resolution (cm)
1cm  
Y Pixel Resolution (cm)
1cm  
Seamlessness
Full  
Number of Bands
1 
Band List
1  
Resampling Kernel
Nearest Neighbour  
Rectification Type
Not Rectified  
Platform Name
Fixed Wing Aircraft  
 
 

Point Cloud Data Details

 
 

Contour Data Details

 
 

Survey Details

Sensor

Title
Trimble AX60 
Identifier
Aerial

Type
LIDAR 
Cloud Cover Percentage
0 
 

Aerial Survey Details

Runs
4567 
Run Orientation
E-W and N-S  
Swath Width
520 
Side Overlap
30 
Flying Height Unit
agl metre  
Flight Height
450 
 
 

    Overviews

  Provided by

  Share on social sites

         

  Views Views

  • Simple
  • Simple
  • Full
  • XML
c0d4fb08-1c2f-5252-ab80-046d987fa1ca   Access to the portal Access to the portal Read here the full details and access to the data. Read here the full details and access to the data.

  Associated resources

Not available


  •  
  •  
  •