Ausgeoid09 - LiDAR
dataset
Dataset: Ausgeoid09 - LiDAR
Assembly: Single
|
Citation proposal Citation proposal
Ausgeoid09 - LiDAR Department of Transport and Planning https://metashare.maps.vic.gov.au/geonetwork/srv/eng/catalog.search#/metadata/cac60278-dbd6-5441-b2ba-e59c1ba72e3e |
Details
Contacts
Point of contact
Department of Transport and Planning
-
Coordinated Imagery Program
PO Box 500
East Melbourne
Victoria
3002
Australia
Identifiers and Keywords
- ANZLIC Id
- ANZVI0008102980
- Topic category
-
- Elevation
Resource Constraints
- Use limitation
- General
- Classification
- Unclassified
Other Dataset Details
- Format
- LAS 1.2
Spatial
- Spatial representation type
- Point Cloud
- Reference system identifier
- MGA Zone 55 GDA94
Resolution
- Horizontal Accuracy
- 0.3m
- Vertical Accuracy
- 0.1m
Quality
- Conceptual Consistency
- Both Ausgoid09 and Melbourne Geoid datasets meet all specifications and adhere to format and naming standards. The original source dataset for Melbourne Structural Vegetation LiDAR has a vertical accuracy of 0.2m (RMSE). The reprocessed datasets supplied in this project both have increased the vertical accuracy to 0.10m (RMSE). The dataset referenced to AHD using Ausgeoid09 reveals a marginally better fit to test points and should be used in preference to the Melbourne Geoid version.
- Missing Data
- The LiDAR dataset is complete for the whole reprocessed AOI. LiDAR data from adjacent projects assessed in the edge matching process have not been supplied in this dataset. Cut-lines used to define overlap-merge zones between data sets have been supplied. Tilt adjustment details have been supplied with the project.
Lineage
- Description
- Work flow stages: 1. Archived data from existing projects was retrieved (this included surrounding projects) 2. New areas of Test Points were surveyed and collected (5 new sites and 400 plus points) 3. Data was classified into ground and non-ground points using a single algorithim and modelled to AHD. Two separate versions were created using two different Geoid Models: 1. Ausgeoid09 and 2. Melbourne Geoid 4. An assessment of the Test Points against the modelled data was made. 5. A tilt in a general east-west direction was observed when the Test Points were compared to both the Ausgeoid09 and Melbourne Geoid datasets. 6. An adjustment tilt was applied to obtain a better fit to Test Points (+6cm at the western edge and -6cm at the eastern edge). 7. An assessment to validate adequate edge joins to adjacent projects was also undertaken. Work was conducted between September and November 2014 by AAM using original 2011 Melbourne Structural Vegatation LiDAR data as source data. Adjacent (edge-matched) projects include: Vic Coastal LiDAR, Geelong North - Anakie & Golden Plains LiDAR and the LARA LiDAR data (itself being reprocessed 2011 Melbourne Structural Vegatation LiDAR data).
Text
No information provided.
Acquisition Date
- Begin date
- 2012-02-06
- End date
- 2012-03-09
Instrument
- Name
- Optech ALTM Orion
- Type
- LIDAR
- Platform Type
- Aerial
Acquisition Data (Common)
- Status
- complete
- Assembly
- Single
- Tile Size
- 2 km
- Cloud Cover Percentage
- 0
Point Cloud Details
- Pulse Mode
- Single
- Scan Rate (Hz)
- 100Hz
- Scan Frequency (kHz)
- 45kHz
- Scan Angle (degrees)
- 22degrees
- Footprint Size (m)
- 0.25m
- Point Density Actual (pts/m2)
- 4points/m2
- Point Spacing Actual (pts/m)
- 0.5points/m2
- Ellipsoid Provided
- 0
- Geoid Vertical Datum
- AUSGEOID09
- Additional Adjustments
- A tilt was applied on top of the Ausgeoid09 model. The tilt is supplied with the project data set and ranges from -0.06m to 0.06m west to east.
- Class Level
- 2
- Classification
-
Class Level Class 0 - Unclassified Class 1 - Default Class 2 - Ground Class 3 - Low Vegetation Class 4 - Medium Vegetation Class 5 - High Vegetation Class 6 - Buildings/Structures Class 7 - Low/High Points Class 8 - Model Key Points Class 9- Water Class 10 - Bridge Class 12 - Flightline Overlap Points 2 0 1 1 1 1 1 1 1 1 1 1 0
Aerial Survey Details
- Runs
- 83
- Run Orientation
- Various
- Swath Width
- 807
- Side Overlap
- 25
- Forward Overlap
- 0
- Flying Height Unit
- agl metre
- Flight Height
- 1000
About the Metadata Record
- Metadata identifier
- cac60278-dbd6-5441-b2ba-e59c1ba72e3e
Contact
No information provided.
- Resource Type
- Dataset
- Date info ( Revision )
- 2023-03-22T00:22:23
- Standard Name
- ISO 19115-3:2018
- Profile Name
- DELWP Profile
- Profile Version
- Version 1
- Profile Date
- 2019-05-24
Metadata Constraints
- Classification
- Unclassified
Overviews
Provided by
Views Views
cac60278-dbd6-5441-b2ba-e59c1ba72e3e
Access to the portal Access to the portal
Read here the full details and access to the data. Read here the full details and access to the data.
Associated resources
Not available